–在工程師指導下根據各工段（鉆孔/laser，電鍍，photo，DES，AOI，層壓，punch，lay－up，SM等）的工藝要求和設備的性能而制定出合理的工藝方案，維護并不斷的完善，進行有效的process control;
According to each process station ( drilling / laser, plating, photo, DES, AOI, punch, laminated, Layup, SM ) process requirements and equipment performance, establish a reasonable process operation solution, maintain and continuously improve it with effective process control;
–協助編寫工藝操作規范和作業指導書
Support process engineer to establish the process operation standard and work instructions
–負責對技術員的培訓，同時根據柔板生產部安排對督導、組長甚至一線操作工培訓，并確認培訓效果
Responsible for technician training, and according to the arrangement from production department to train supervers, line leader, even operators. Also need to follow the effectiveness of training
–針對成品率的提高和成本的降低，配合工程師組織和實施相應工段的改善措施
Support engineer to reduce operation cost through organization and implementation of the corresponding process improvement,support engineer to improve the yield improve
–帶領技術員在生產過程中不斷的去檢查和督促柔板生產部工人按照規范操作，并隨時糾正，同時要防止工藝問題而影響生產
要求：
–大專以上學歷（濕工藝需化學、化工、機械類相關專業，干工藝需機械、電子、自動化類相關專業）
College education ( wet process chemical, chemical, mechanical or relevant major, dry technology of mechanical, electronic, automation related majors )
–從事Flex工藝2年或PCB3年以上技術經歷In the Flex process with 2 year or3 years experience in PCB technical experience ;
–熟悉電腦操作
Familiar with computer operation;
–有團隊精神
Team spirit;
–了解有害物質管理
–Well understanding with HSM
–英語聽說讀寫良好，能閱讀英文資料
Good English skill, can read English materials
–協助工程師完成工藝文件的編寫和完善，保證所負責各工段的正常運行，不斷的提高成品率和工作效率，配合工程師主導各項試驗的實施，報告給相關工程師或主管